Silicone rubber is used to manufacture many types of parts, including seals, buttons, impact protection, overmoulded components and numerous medical products.

Silicone is colourless, odourless and tough, with high heat resistance. It also offers good chemical and UV resistance.

Silicone’s high elongation at break also allows challenging undercuts and complex internal cores.

Elastomeeriranneke_311019

Figure 1. Silicone wristbands in different colours

Figure 2. Silicone colour and hardness samples in different thicknesses. Also shown are SLA 3D-printed parts: a clear SLA part with and without a clear coat, and white Accura Xtreme (at the top).

SiliconeShoreA15       – ShoreA40ShoreA48ShoreA60
Density [g/cm³]1,061,151,311,10
Tensile strength ISO 37 [N/mm²]6,5857,4
Elongation at break ISO 37 [%]900450300600
Tear strength ASTM D 624 B15151016

Table 1. Typical technical values for different silicone hardnesses.

Need a prototype, a small batch or production parts?

← Back

Thank you for your response. ✨